How to Install
Your Click Fit Blinds
Simple step-by-step instructions for a perfect fit.
BEFORE YOU START
Check your brackets and screws
Make sure you have all parts and fixings supplied.
Use the correct tools
Having the right tools makes installation easier and safer.
Mark holes before drilling
Always mark your fixing points to avoid mistakes.
Fit brackets level and secure
Use a spirit level to ensure your blinds hang straight.
STEP-BY-STEP INSTALLATION
Follow these simple steps
1
Fit the Corner Brackets
Using the supplied multi-tool, carefully insert the four fixing brackets underneath the rubber window seals in each corner of the window.
The brackets should sit fully into the corners beneath the seal, ready to support the side guides.
2
Assemble & Fit the Side Guides
Insert the supplied fixing brackets into the top and bottom of each side guide, then clip the side guides onto the corner brackets already fitted to your window.
Install the supplied side guide clips evenly down each side of the window using the multi-tool. These keep the side guides securely against the glass.
3
Attach the Blind
If your blind includes removable handles, slide them onto the top and bottom rails before fitting.
Position the top cord blocks over the top fixing brackets, then use the multi-tool to push the top rail into the side clips until it clicks securely into place
4
Secure the Bottom Rail
Fit the bottom cord end caps over the lower fixing brackets.
Using the multi-tool, push the bottom rail firmly into the side clips until both sides click securely into position.
5
Test Your Blind
Your Easy Click Blind is now ready to use.
Use the handles to move both the top and bottom rails, allowing you to position the blind exactly where you want it for privacy and light control. If required, the cord tension can be adjusted using a 1.5mm Allen key, although every blind is factory tensioned and ready to use straight out of the box.
COMMON MISTAKES
- Not using a spirit level
- Drilling without checking for cables or pipes
- Not securing brackets firmly
- Forgetting to check the blind operates smoothly
FREQUENTLY ASKED QUESTIONS
Can I install my blind inside the recess?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
What if my wall is plasterboard?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
How do I remove the blind?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
What tools do I need?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.