How to InstallYour No Drill Roman Blinds
Simple step-by-step instructions for a perfect fit.
BEFORE YOU START
Check your brackets and screws
Make sure you have all parts and fixings supplied.
Use the correct tools
Having the right tools makes installation easier and safer.
Mark holes before drilling
Always mark your fixing points to avoid mistakes.
Fit brackets level and secure
Use a spirit level to ensure your blinds hang straight.
STEP-BY-STEP INSTALLATION
Follow these simple steps
1
Unpack Your Blind
Carefully remove your blind from the packaging and place it on a clean, dry surface.
The fabric is already attached to the headrail. Gently fold back the fabric at both ends of the blind, leaving the centre attached. This allows you to hold the headrail during installation without creasing or marking the fabric.
2
Position the Blind
Lift the blind into the window recess, inserting the plunge end first.
Hold the headrail only where the fabric has been folded back and position the blind so the headrail sits flush against the top of the window recess. Before securing it, check that the blind is level and operates freely without fouling window handles or other obstructions.
Tip: Positioning the blind as far back into the recess as possible will help reduce light bleed.
3
Lock the Blind in Position
Hold the headrail firmly and ensure the blind remains level.
Rotate the large adjustment cog on the plunge end to lock the blind securely into the recess.
- Right-hand controls: Turn the cog towards you.
- Left-hand controls: Turn the cog towards the window.
This expands the mechanism to hold the blind securely without the need for drilling or screws.
4
Fully Tighten the Mechanism
Using the supplied adjustment tool, tighten the locking mechanism until the blind is firmly secured and remains level.
Once tightened, smooth the fabric back onto the headrail.
5
Test Your Blind
Operate the blind several times to ensure it raises and lowers smoothly.
Always use the control chain gently and avoid pulling sharply, helping to protect the mechanism and ensure long-lasting performance
COMMON MISTAKES
- Not using a spirit level
- Drilling without checking for cables or pipes
- Not securing brackets firmly
- Forgetting to check the blind operates smoothly
FREQUENTLY ASKED QUESTIONS
Can I install my blind inside the recess?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
What if my wall is plasterboard?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
How do I remove the blind?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.
What tools do I need?
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the librarian at St Bride Printing Library in London, took a 1914 Cicero translation and scrambled it to make dummy text for Letraset’s Body Type sheets.